BUS interfaces for connecting 2 or 4 push-buttons or conventional potential-free contacts. The reading voltage (SELV) is generated inside the device. For each input, an output is available for powering a low absorption LED (lower than 1mA such as, for example, GW10886, GW10887, GW10888, GW10889, GW10890) for displaying the status of the load commanded. To be configured with ETS software or with Easy Controller.
For sending ON-OFF commands with fronts management, switching commands, timed commands, priority commands, commands for controlling thermoregulation and commands for managing roller shutters (single or double push-button), dimmers (single or double push-button), scenes (storage and activation), output LED control, acquisition of temperature values via NTC sensor (GW90834A only). The input channels can be configured as alarm inputs (weather sensors). Installation in flush-mounting box, junction boxes or embedded in the blanking modules GW10571, GW12571, GW14571. The slot on the plastic casing also allows it to be fixed with screws.
Equipped with coupling terminal for connection to the BUS, and unshielded cables for connecting the inputs, of length 30 cm extendible to 10m with unshielded twisted cable.
